Combat Descaler Pa - 5 Litres

Product Features

• A highly effective acidic detergent based on phosphoric acid
• It has wide application as a descaler and is suitable for use in all hard water types
• Food safe – does not taint foodstuffs

Direction for Use

• This product is classified as corrosive -take great care when using it
• Only personnel trained in its use to handle this product
• Wear protective clothing as provided
• Catering Industry: Bain maries, kettles, dishwashers – dilution is dependent upon the level of calcium deposits
• Use at a dilution rate of 1% to 5% (10ml to 50ml / litre).
• For cleaning floors, walls and equipment: Use at 1% to 2% (10ml to 20ml / litre) and apply manually by scrubbing or soaking
• Use at ambient temperature and allow a 10 minute contact time, followed by thorough rinsing with clean water.
• Dairy Industry: Combat Descaler PA is an excellent milkstone remover
• For occasional descaling of HTST plant, storage tanks and pipelines use a 1.0% v/v solution at 70o-80oC
• As an acidic clean in two stage cleaning following alkali, use a 0.5-1.0% v/v solution at 70o-80oC
• UHT plant -as acidic clean following alkali circulation
• Use a 0.75-1.5% v/v solution
• Churns -remove milkstone by soaking in warm solution (1.0% v/v) or operate churn washer for 2-3 days using a 0.5% v/v solution
• Brewing Industry: To descale fermenting vessels, maturation tanks, etc
• circulate a 2.0-5.0% v/v solution for 30-45 minutes
• Where heavy scaling exists circulation may be repeated using the same acid if the descaling is incomplete
• Paraflows -to descale both the liquor and product side a concentration of 5.0% v/v is recommended, circulated for 30-45 minutes at up to 50°C
• Routine cleaning -Combat Descaler PA is ideal for cleaning maturation tanks, mains, bright beer tanks, stainless keg fillers and bottle fillers
• Used at 1.0-2.0% v/v, cold or warm, it will remove beer stone deposits and also light protein soiling
• Suitable for cleaning brewery plant under a carbon dioxide atmosphere, enabling the carbon dioxide to be retained
• Stainless steel and aluminium casks -soak in a hot 1.0-2.0% v/v solution or run cask washer for a short period on a 0.5% v/v solution
• Food Industry: General descaler for tanks, pipes, heat exchanges, etc
• -is particularly useful for the removal of fish slime from fish boxes and dried blood from tiled surfaces in abattoirs
• In the latter case, use in undiluted form.