Selstat Floor Polish
- Code: A02
-
£13.00
High performance dissipative floor polish for all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors
Not suitable for unsealed wood, unsealed cork or laminate flooring
Retains performance even at humidities as low as 11% Independently tested to IEC 61340 - 4 - 1 and BS 7506
Makes charge dissipate off a standard vinyl floor
Improves the conductivity of conductive flooring
Applies, hardens and protects like a normal floor polish
Non-slip
| General | |
| Size | |
| Specification | 5 litre single unit |
Selstat must be applied to a clean grease free floor
Strip old polish with Selate then rinse thoroughly with clean water, allow floor to dry
Apply a thin even film of Selstat using a clean lint free mop or applicator
Apply a second coat when the first is dry (approximately 30 minutes)
COVERAGE: 60 square metres per litre
